 |
Glass
Fibre Reinforced (GFR) Thermoplastics |
 |
Glass Fibre
Reinforced Polypropylene (GRPP) :- |
| |
GRPP enriches polypropylene’s
mechanic thermal properties, creep resistance
and size stability. It is mainly used to
make accumulator casings, heater casings,
belt wheels of washing machine, automobile
parts and variable pipe/pipe sittings etc.  |
|
Glass Fibre
Reinforced Polyethylene (GRPE) :- |
| |
GRPE is specially developed
to make variable motor fans and other parts
in mechanic, electric and chemical industries.
|
|
Glass Fibre
Reinforced ABS and AS (GRABS and GRAS) :-
|
| |
Compared with ABS and
AS pure resin, GRABS and GRAS offer higher
tensile strength, flexural strength, flexural
modulus and heat distortion temperature,
and lower coefficient of linear thermal
expansion and mould shrinkage, and excellent
electrical properties and size stability.
GRABS and GRAS also improve weatherability,
slackness resistance, creep resistance and
fatigue resistance. They are ideal materials
to make highly precise products, so they
can be widely applied in domestic electronic
/ electric appliance and instrument industries,
making tape recorder core base plates, tape
case, instrument and camera casing, sewing
machine parts and electric tools and making
variable impellers of air-conditioner fan,
centrifugal blower and axial-flow fan etc. |
|
Glass Fibre
Reinforced PA (GRPA) :- |
| |
GRPA overcomes PA’s
weakness of strong hygroscopicity and raises
Pa’s using temperature, surface hardness,
tensile strength and abrasion resistance.
It can be used instead of metal to make
gears, transmission parts, electric appliance
case, wire frame, insulated components,
oil-resistant and abrasion – resistant
parts.
|
|
Glass Fibre
Reinforced PBT and PET (GRPBT and GRPET)
|
| |
Because of their excellent
mechanic, electrical, welding, moisture
resistance, weatherability properties and
high HDT, GRPBT and GRPET can be widely
applied in electronic / electric appliance,
automobile and mechanic industries, making
E/E switches, resonator case, transformer
case etc. |
|
Glass Fibre
Reinforced PC and POM (GRPC and GRPOM) |
| |
GRPC and GRPOM both
have very nice mechanic properties and size
stability; they can be used to make précised
components in machinery and E/E industries. |
|
Plastic
Alloys : |
| |
Plastic Alloys are todays
main trend in modified plastic research.
It is the concentration of characteristics
of two or more plastics when brought together,
to meet / fulfill customer’s specific
requirement. These can be used to make precise
instrument components, mobile phone covers
and car fascia board, ABS/PVC alloy can
be used to E/E casings and household appliance
instead of flame retardant ABS for its lower
cost. |
|
PC / ABS Alloy |
| |
Main Application : Precise
parts of E/E
Housing
of cellphone
High
grade auto fascia board |
|
ABS/PVC Alloy |
| |
Main Application : Housing
of Ammeter |
|
PC/PBT Alloy |
| |
Main Application : High
grade auto fascia board
Precise
parts of E/E
Housing
of cellphone |
| |
Steel Pipe and
Tube Coating Plastics :- BFPE is
high performance material for coating of
steel pipes and tube, offering easy proccessibility
during extrusion, outstanding performance
for slow crack growth (SCG), environmental
stress cracking resistance (ESCR), mechanical
strength and superior UV-resistance. |
|
Special
Functional Plastic |
|
Melt Blown PP
– Melt Blown PP is mainly
used as material for making PP nonwoven
clothes because of its ultra-high fluidity.
|
|
Peroxide Masterbatches
– Peroxide Masterbatches
is mainly used to adjust MFR of polypropylene
as to process easily. There are 2 types
of PM including PM – 1600 and PM –
1350. |
|
High Filled
Masterbatches – High Filled
Masterbatches can be directly used PE or
PP processing to reduce production cost.
We can provide EHF-115, PHF-116 and EHF-120T.
EHF-115 is based on PE carrier and filled
with Calcium Carbonater (CaCO3), PHF-116
based on PP carrier and filled with CaCO3,
and EHF-120T based on PE carrier and filled
with Talc. All HF master batches can be
used to make film, woven bag, thermal insulation
material etc. |
|
Modified
special plastics |
| |
|
PP127-A
Main Application
: R/L glovebox, Up/Down shield
|
|
|
PP127-B
Main Application
: Handrail assembly, Sub-panel,
Dust collector, Rind, R/L handle cover,
Ashtray base. |
|
ABS-27B
Main Application
: Indoors lamp, front/rear
deck assembly,
front dustproof cove |
|
ABS-27C
Main Application
: R/L shield A/B |
|
PA66
Main Application
: Clothing hook assembly |
|
PA+GF
Main Application
: GFR nylon |
|
PP/EPDM
Main Application
: Auto bumper handle, Oil fender
board,
Flexible pipe clamp, Clip, gasket |
|
Panel
Assembly
Main Application
: Panel / fascia assembly |
|
|
Conducive Plastic
: – |
| |
Conductive plastic including
PE, HIPS, PP, ABS those can be used to make
plastic board, slice, pipe and blown film
with high performance through different
process such as injection, extrusion and
blowing, widely applied in industry, agriculture,
E/E, military technology, spinning, coal
mine, oil and automobile industries. |
| |
|
PS-DDPS
Main Application
: Injection extrusion
|
|
|
PE-DDPE
Main Application
: Blowing pipe |
|
PP-DDPP
Main Application
: Slice and board extrusion
Injection |
|
MASTERBATCH
DDMB
Main Application
: Conductive and antistat |
|
|
Modified Plastic
Material :- |
| |
Modified PP improves
its rigid, strength and thermal properties
and can be used to make E/E casings and
interior decoration parts of E/E appliances
and automobiles. Modified PA can be used
in E/E and construction industries due to
its lower mold shrinkage, moisture absorption
and excellent toughness. Modified PC can
be mainly used to make high strength decoration
parts of automobiles, yarn tubes and other
high strength components. |
|
Modified
PP |
| |
 |
TCPP
Main Application
: Housing of compress filter
|
|
|
THPP
Main Application
: Autointerior décor |
|
High
Luster PPHGPP
Main Application
: Housing of home appliances
Sound box |
|
|
Modified PA
|
| |
|
IPA6
Main Application
: gears and components
|
|
|
IPA66
Main Application
: Gunstock support rail pad |
|
|
Modified PC
|
| |
|
IPC-01
Main Application
: Auto interior décor
yarn tubes
|
|
|
|
Modified PP
for Automobile use :- |
| |
Various types
of Modified PP is widely used in the automobile
industry to make ; automobile bumpers, instrument
panels, fan brackets, radiator covers, steering
wheels, distributor covers, wind protection
brackets, air trunks and battery housing
etc. |
|
CPIB |
| |
|
Main
Application : Light truck
bumper
Car bumper
|
|
|
|
CPIP |
| |
|
Main
Application : Door board
of automobile
|
|
|
|
CPIF |
| |
|
Main
Application : Guard Ring
of autofan
|
|
|
|
CPH |
| |
|
Main
application : Housing of
auto warmer
|
|
|
|
CP |
| |
|
Main
Application : Auto Radiator
|
|
|
|
CZW |
| |
|
Main
Application : Auto Sundries
box
|
|
|
|
DMPP1
|
| |
|
Main
application : Automobile
bumper
|
|
|
|
DMPP2 |
| |
|
Main
application : Automobile
interior decor
|
|
|
|
DMPP3 |
| |
|
Main
application : Automobile
fascia board
|
|
|
|
DMPP4 |
| |
|
Main
application : Automobile
door interior board
|
|
|
|
DMPP5 |
| |
|
Main
application : Automobile
fan
|
|
|
|
PPA |
| |
|
Main
Application : General purpose
Rearview mirror,
Handle, Outer parts
|
|
|
|
PPB |
| |
|
Main
Application : High impact,
Battery shield,
Inner decoration parts,
Steer, Radiator shield,
Cooling fan, Battery outer cover.
|
|
|
|
PPC |
| |
|
Main
Application : Heat stable
and regid,
Air-conrind, Instrument cover,
Lamp cover, Fan shield,
E/E cover, Radiator shield.
|
|
|
|
PPD |
| |
|
Main
Application : Heat stable
and regid,
High impact safety belt,
Air filter body, Fan shield.
|
|
|
|
PPE |
| |
|
Main
Application : Glass reinforced
Horn button,
Battery bracket, Pedal, Fender,
Trunk Parts.
|
|
|
|
PPF |
| |
|
Main
Application : Heat stable
and high impact wind protector.
Water tank cover, Fan bracket.
|
|
|
|
PP/PE |
| |
|
Main
Application : R/L fender
board
|
|
|
